Click image to view full size image
0.18 mm-0.6mm Z60 top layer 20+5μm back layer 10μm conventional type PPGI coil
This specification is very economical, suit for common use. The lowest thickness of base metal is 0.14mm.
Specifications:
| base metal | Hot dipped galvanized steel |
| Thickness | 0.18mm-0.6mm |
| Width | 1000mm 1219mm 1250mm |
| Coil ID | 508mm, 610mm |
| Layers of the coating | 2/2(2 layers of top coating/2 layers of bottom coating); 2/1(2 layers of the top coating, 1 layer of bottom coating); 1/1(single layer of top coating/ single layer) |
| Color | According to customers’ request |
| Paint | PE, |
| Thickness of the coating | 20+5/10 |
| Zn coated | 60g/ |
0.18 mm-0.6mm Z60 top layer 20+5m back layer 10m conventional type PPGI coil
